Facebook Twitter Youtube

CEMENTING ADDITIVE

Our range of cementing additives is engineered to enhance well integrity, improve bonding strength, and optimize cement performance under challenging conditions. From bonding agents to retarders and fluid loss control additives, SMOG Solutions provides a complete line of cementing solutions for onshore and offshore operations.

SBA50s SMOG Bonding Agent – Advanced Cementing Additive

Code: SBA50s

The SBA50s Bonding Agent is a high-performance cementing additive engineered to strengthen well integrity and optimize cement performance in oilfield and geothermal applications. Formulated as a water suspension of ultra-fine silica particles (average size 0.8 microns), SBA50s reduces cement permeability by chemically and physically blocking the slurry matrix. During hydration, it forms a silica gel that seals pore spaces, enhancing cement bonding, compressive strength, and long-term durability.

  • Superior Bonding Agent – Improves cement adhesion to both casing and formation for reliable zonal isolation.

  • Gas Migration Control – Effectively reduces annular gas migration, ensuring safer well operations.

  • Enhanced Strength Development – Boosts early and long-term compressive strength of set cement.

  • Thixotropy & Lost Circulation Control – Imparts thixotropy to slurries, helping control lost circulation and reduce free water.

  • Lightweight Cement Extender – Functions as an extender for lightweight cement and a strength enhancer for low-temperature lightweight slurry.

  • Broad Application Range – Suitable for wells with BHCT from 50°F to 500°F.

  • Fluid Loss Reduction – Interacts with fluid loss additives to minimize slurry water loss.

  • Salt Slurry Compatibility – Acts as an extender and low-temperature accelerator in saturated salt

Ideal for oil & gas well cementing, geothermal wells, and any cementing operations requiring improved bonding, reduced permeability, and enhanced compressive strength.

  • Form: Liquid (solid suspension)
  • Color: Grey to dark grey
  • Specific Gravity: 1.35 – 1.40
  • Bulk Density: 11.26 – 11.68 lbm/gal
  • pH: 4.0 – 7.0
  • Standard supply: 55-gallon open-top steel drums
  • Custom packaging available upon request

SRC100s SMOG Retarder Cement – Advanced Cementing Additive

Code: SRC100s

SRC100s is a specially formulated low temperature cement retarder additive designed to extend pump times and delay cement setting in cold well conditions. It ensures that cement sets precisely at the desired location in the drilling string.

Compatible with anionic and non-ionic materials, dispersants, wetting agents, and most organic and inorganic materials, SRC100s offers excellent flexibility in cementing designs. It contains no hazardous ingredients and is regarded as an environmentally friendly retarder for the oil & gas industry.

SRC100s is optimized for low circulating temperatures up to 180°F (82°C) and is suitable for a wide range of API cement systems.

  • Provides effective retardation in low temperature cementing operations
  • Extends pump times to ensure cement placement at the correct location
  • Liquid additive that is easy to handle and apply
  • Functional across a wide range of cement systems
  • Non-toxic and environmentally friendly formulation
  • Compatible with commonly used additives in the oilfield market
  • Primary and remedial cementing operations in low temperature wells
  • Surface cementing jobs requiring extended pump times
  • Compatible with a broad range of API cements and common cement additives
  • Description: Low Temperature Retarder Additive
  • Function: Retarder
  • Chemical Description: Sodium Lignosulfonate Solution
  • Form: Liquid
  • Color: Dark Brown
  • Specific Gravity: 1.00 – 1.20
  • Bulk Density: 8.34 – 9.96 lbm/gal
  • pH: 7.0 – 8.0

  • Standard supply: 275-gallon IBC Tote

  • Custom packaging available upon request

SRC500s SMOG Retarder Cement – Advanced Cementing Additive

Code: SRC500s

SRC500s is a specially formulated cement retarder additive designed for high-temperature conditions in oil & gas cementing operations. It effectively delays cement setting, providing extended pump times to ensure cement placement at the desired location within the drilling string. In addition to retarding, SRC500s also functions as a dispersant, delivering dual benefits for improved slurry performance.

SRC500s is suitable for circulating temperatures up to 310°F (154°C) and is compatible with a wide range of additive combinations in API cements. The product contains no hazardous ingredients and is considered an environmentally friendly cement retarder for both onshore and offshore applications.

  • Provides both retarding and dispersing properties for cement slurries
  • Effective in circulating temperatures up to 310°F (154°C)
  • Environmentally friendly formulation with no hazardous ingredients
  • Compatible with API cements and a wide range of additives
  • Ensures good strength development, even in low-temperature seawater-based systems
  • Ideal for offshore use, delivering stable pump times and strong performance in surface and intermediate casing cementing
  • Performs well in deep casing applications, providing good top-of-cement (TOC) strength even with long cement columns

  • High-temperature cementing operations where extended pump times are required

  • Offshore cementing where seawater is used as mix water

  • Lead and tail slurries across a wide temperature range

  • Cementing surface and intermediate casings, long strings, and production liners

  • Standard supply: 55-gallon steel open-top drum

  • Custom packaging available upon request

  • Standard supply: 55-gallon open-top steel drums
  • Custom packaging available upon request

SMOG High Temperature Fluid Loss

Code: SFL20s

SFL20s is a high-performance fluid loss control additive designed for offshore cementing operations where logistics demand a minimal suite of additives. It enhances slurry stability and, at higher concentrations, provides an additional element of gas control.

SFL20s can be used as a standalone additive to design low-viscosity cement slurries with effective fluid loss control during primary cementing operations. It is fully compatible with dispersants, SRC500s retarder, and other cementing additives in the market.

In standard density slurries (~15.8 ppg), SFL20s ensures easy mixing and reliable fluid loss control across a wide temperature range, performing effectively in wells with bottomhole circulating temperatures (BHCT) up to 300°F (148°C).

  • Provides excellent fluid loss control up to 300°F (148°C) BHCT
  • Compatible with dispersants, SRC500s, and other cement retarders
  • Enhances slurry stability and gas control at higher concentrations
  • Liquid additive for easy application via liquid additive systems
  • Flexible across a wide range of density and temperature conditions
  • Suitable for offshore operations, particularly in seawater-based cementing systems

  • Offshore cementing operations where limited additives are preferred

  • Primary cementing operations requiring low-viscosity, stable slurries

  • Standard density cement slurries with fluid loss control requirements

  • Compatible with both freshwater and seawater systems

  • Form: Liquid (solid suspension)
  • Color: Grey to dark grey
  • Specific Gravity: 1.35 – 1.40
  • Bulk Density: 11.26 – 11.68 lbm/gal
  • pH: 4.0 – 7.0

  • Standard supply: 55-gallon open-top steel drum

  • Custom packaging available upon request

SMOG Multifunction Fluid Loss

Code: SFL4s

SFL4s is a multifunctional fluid loss control additive for cement slurries, particularly beneficial in offshore operations where simplified logistics are required. It not only improves slurry stability but also contributes to strength enhancement, especially in lightweight cement systems.

SFL4s can be used as a standalone additive to design low-viscosity, lightweight slurries with effective fluid loss control during primary cementing operations. When applied to standard density slurries (~15.8 ppg), SFL4s produces mixable yet slightly more viscous slurries with reliable fluid loss control across a wide temperature range.

It is engineered for use in lightweight and normal density slurries at bottomhole circulating temperatures (BHCT) up to 300°F (149°C). While designed primarily for seawater systems, it can also be applied in freshwater systems with appropriate slurry design adjustments.

  • Liquid additive easily applied through liquid additive systems
  • Adds viscosity to slurries, even lightweight ones, removing the need for viscosifying agents in most cases
  • Compatible with high-temperature retarders without over-dispersing slurry
  • Effective across a wide range of density and temperature conditions
  • Provides free water control, particularly below 200°F (93°C), reducing risk of communication in deviated or horizontal wells

  • Offshore cementing operations requiring minimal additive systems

  • Primary cementing operations for both lightweight and normal density slurries

  • Fluid loss control in seawater and freshwater cementing systems

  • Slurry designs where added viscosity eliminates the need for separate viscosifiers

  • Form: Liquid (solid suspension)
  • Color: Grey to dark grey
  • Specific Gravity: 1.35 – 1.40
  • Bulk Density: 11.26 – 11.68 lbm/gal
  • pH: 4.0 – 7.0

  • Standard supply: 55-gallon open-top steel drum

  • Custom packaging available upon request

SMOG Cement Dispersant 33 Series

Code: SCD33s

SCD33s is a high-performance cement dispersant based on water-soluble polymers, designed to improve the flow and stability of cement slurries. It is particularly effective in creating normal density, low fluid loss slurries that can be pumped in turbulent flow, enhancing displacement efficiency during primary and remedial cementing.

Unlike conventional dispersants, SCD33s is formulated to deliver improved performance and flexibility across a wide temperature range. Typically, it is applied in concentrations of 0.03 to 0.3 gallons per sack of cement, making it both effective and economical.

  • Provides turbulent flow properties in low fluid loss slurries, improving displacement efficiency
  • Inhibits excessive viscosity caused by fluid loss and gas control additives
  • Effective across a wide temperature range: 40°F to 400°F (4°C to 204°C)
  • Compatible with all API cements and most cement additives
  • Reduces additive concentrations needed in gas control and fluid loss systems, lowering costs
  • Minimizes mud contamination in cement by improving annular displacement
  • Reduces waiting-on-cement (WOC) time, cutting drilling costs
  • Improves slurry pumpability, resulting in fewer mixing problems on-site

  • Primary and remedial cementing operations

  • Turbulent flow slurries requiring efficient displacement

  • Normal density cement systems with low fluid loss requirements

  • Compatible with API cements and a wide range of cement additives

  • Form: Liquid (solid suspension)
  • Color: Grey to dark grey
  • Specific Gravity: 1.35 – 1.40
  • Bulk Density: 11.26 – 11.68 lbm/gal
  • pH: 4.0 – 7.0

  • Standard supply: 55-gallon steel open-top drum

  • Custom packaging available upon request

CONTACT US TODAY

At SMOG Solutions Sdn Bhd, we are committed to providing safe, innovative, and sustainable chemical solutions for the oil & gas, drilling, and industrial sectors. Whether you need more information about our cementing additives, nano mud additives, foam wiper balls, or rig wash solutions, our team is ready to assist you.

INQUIRE ABOUT THE PRODUCTS NOW
Scroll to Top